Digital ID View 960H Series Manual de instrucciones Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 131
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
52
Setting up your DVR for Remote Connectivity
Accessing your DVR within a local network (LAN)
You can connect to your DVR through Internet Explorer through the local area network
(LAN). It is recommended to confirm connectivity over a local network before setting up
your DVR for Internet connectivity.
NOTE: To complete the steps below, your computer must be on the same network as your DVR.
NOTE: Except where noted, the instructions below are the same for PC and Mac.
Step 1 of 3: Connect your DVR to the Local Area Network
1 Power off your DVR by turning the power switch to .
2 Connect an Ethernet cable (included) to the LAN
port on the rear panel of the DVR. Connect
the other end of the Ethernet cable to a router or switch on your network.
3 T
urn the power switch to I t
o power the DVR back on.
ROUTER
(Not Included)
COMPUTER
(Not Included)
(not required for
local viewing)
INTERNET
Ethernet Cable (included)
8-channel model shown
Step 2 of 3: Obtain the DVR’s Local IP Address
1 Press the PTZ/ button on the front panel of the DVR to open the System Information
window.
DVR IP address
HTTP Port
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 130 131

Comentarios a estos manuales

Sin comentarios