Digital ID View 960H Series Manual de instrucciones Pagina 123

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 131
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 122
111
Appendix D: Recording Audio
Appendix D: Recording Audio
The system can also record audio for up to 4 channels (D3304 or D3216), 8 channels
(D3308), or 16-channels (D3316). You must have audio-capable cameras (not included) or
self-powered microphones (not included) in order to record audio on the system.
Connect a BNC audio cable from the camera
into the corresponding Audio INPUT port
8-channel model shown
NOTE: On D3316, connect the included octopus cable to the Audio In (1~16) port and then connect
BNC audio cables from the cameras to the corresponding connectors on the octopus
cable.
To enable audio recording:
1 Connect the BNC video cable from the camera to one of the BNC Video INPUT ports
on the
rear panel of the DVR.
2 Connect the RCA audio cable from the camera to the corresponding Aud
io INPUT.
3 Right-click to
open the Menu Bar and click the Main Menu button ( ).
4 Click Re
cord and select the MainStream tab.
Check Audio to enable audio recording
on each channel
5 Ensure the Audio checkbox is checked next to the channel the audio-enabled camera is
connected to.
6 Click A
pply to save your changes.
Vista de pagina 122

Comentarios a estos manuales

Sin comentarios