Digital ID View Real-time NETWORK VIDEO RECORDER Guía de usuario descargar pdf (Pagina 33)

Digital Video Hardware User Guide

revision 38 — 33

Selecting the Audio Source

This is where you specify in the operating system what audio source you want to

use to capture sound. This is your Audio Input.

1. From the Control Panel, double click “Sounds and Multimedia.” Click the

Audio tab.

2. Click [Volume] in the “Sound Recording” section.

3. The Recording Control dialog box opens.

4. Select your audio source. If using a microphone, select the box under the

microphone volume slider or “Mic Volume.”

Enable Audio

If you plan on recording audio, the recorder must have the core recording

software activated. Executing this program activates the digital video recorders

capability to recorder audio.

Note: Do not run this program if the video recorder is not going to record audio.

1. The program is located on B.A.S.I.S. Disk 2. Navigate to \Lenel Digital

Video Recorder (LDVR 5.24)\program files\Lenel Systems\LDVR.

2. Run AudioEngager.exe.

3. Select the radio button to enable audio.

4. Click [OK].

You now should be all set up to begin recording audio. Refer to the B.A.S.I.S.

manuals to find out how to enable sound recording in the software.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 133 134

Sin comentarios

Digital ID View Real-time NETWORK VIDEO RECORDER Guía de usuario Pagina 33