Digital ID View 960H Series Manual de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 61
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
Digital Video Recorder for Ness IQ-
Series
- Click (
)
a block and only the block will be registered.
- Click (
)
a row (S~H) and the entire row will be registered.
- Click (
)
a column (00~23) and the entire column will be registered.
- Click (
) a square box (top-
left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click (
to All Camera.
Below lists symbols of
the respective recording modes.
Continuous
Alarm In
Alarm In / Continuous
Alarm In / Pre Alarm
Motion
Motion / Continuous
Motion / Pre Alarm
Motion / Alarm In
Motion / Alarm In / Continuous
Motion / Alarm In / Pre Alarm
Choose ‘OK’ to confirm the setting.
NOTE
Holiday (H) registration is done with a separate menu.
3.5.3 Pre Alarm
Please (
)
RECORD>Pre Alarm and the following will appear.
Pre Alarm is
effectively used when user selected recording mode by Alarm or Motion.
The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.
Series
960H & SDI DVR
a block and only the block will be registered.
a row (S~H) and the entire row will be registered.
a column (00~23) and the entire column will be registered.
left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click (
the respective recording modes.
Holiday (H) registration is done with a separate menu.
RECORD>Pre Alarm and the following will appear.
effectively used when user selected recording mode by Alarm or Motion.
The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.
Page
44
left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click (
) Copy
The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 60 61

Comentarios a estos manuales

Sin comentarios