Digital ID View 960H Series Manual de usuario descargar pdf (Pagina 40)

6.1.1.5 PTZ settings

Allows user to configure the settings if it is connected to a PTZ camera.

 Buzzer – Select On to enable PTZ setting if it is connected to a PTZ camera.

 PTZ Type – Select the PTZ camera type

 PTZ Protocol – Select the correct PTZ protocol type.

 Baud Rate – Select the speed used to transmit instruction or information through the

RS485 port on the DVR.

 Data Bit - The data bit used for transferring. This can be set to 8 or 7.

 Parity: This selects the transmission level of the connection. Choose either None, Odd,

or Even.

 Stop Bit - This field is to set the stop bit for the RS485 connection. This can be set to

1 or 2.

 Address - The address must set to the same address of that PTZ camera.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 114 115

Sin comentarios

Digital ID View 960H Series Manual de usuario Pagina 40